Objective
To restore HP-UX (11i, 11.23 should work) from a backup (make_tape_recovery)
- Login MP console and recycle it
- "CO" to console
- Within that "10 seconds", press any key and see the menu
---- Main Menu --------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT] [ ] Display or modify a path SEArch [DIsplay|IPL] [ ] Search for boot devices COnfiguration menu Displays or sets boot values INformation menu Displays hardware information SERvice menu Displays service commands DIsplay Redisplay the current menu HElp [ - Insert the tape and run "SEA" to search devices
Main Menu: Enter command or menu > SEA Searching for potential boot device(s) This may take several minutes. To discontinue search, press any key (termination may not be immediate). IODC Path# Device Path (dec) Device Path (mnem) Device Type Rev ----- ----------------- ------------------ ----------- ---- P0 0/0/2/0.0 ide.0 Random access media 1 P1 0/1/1/0.0 intscsia.0 Random access media 1 P2 0/1/1/1.4 intscsib.4 Sequential access media 1 Main Menu: Enter command or menu > - Start Restore
Main Menu: Enter command or menu > BOot P2 Interact with IPL (Y, N, or Cancel)?> N Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.43 Apr 12, 2000 ISL booting hpux (;0):INSTALL Boot : tape(0/1/1/1.4.0.0.0.0.0;0):WINSTALL 11751424 + 1962072 + 2627800 start 0x2026e8 alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000. gate64: sysvec_vaddr = 0xc0002000 for 2 pages NOTICE: nfs3_link(): File system was registered at index 4. NOTICE: autofs_link(): File system was registered at index 6. NOTICE: cachefs_link(): File system was registered at index 7. igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0 System Console is on the Built-In Serial Interface Swap device table: (start & size given in 512-byte blocks) entry 0 - auto-configured on root device; ignored - no room WARNING: no swap device configured, so dump cannot be defaulted to primary swap. WARNING: No dump devices are configured. Dump is disabled. Starting the STREAMS daemons-phase 1 Create STCP device files $Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $ Memory Information: physical page size = 4096 bytes, logical page size = 4096 bytes Physical: 2095104 Kbytes, lockable: 1549872 Kbytes, available: 1795200 Kbytes ======= 06/17/13 20:46:28 EDT HP-UX Installation Initialization. (Mon Jun 17 20:46:28 EDT 2013) @(#) Ignite-UX Revision B.5.1.33 @(#) install/init (opt) $Revision: 10.279 $ * Scanning system for IO devices... * Querying disk device: 0/1/1/0.0.0 ... Recovery tape created from system: rp3410 on Mon Jun 3 15:12:27 2013 WARNING: The configuration information calls for a non-interactive installation. Presswithin 10 seconds to cancel batch-mode installation: * Using client directory: /var/opt/ignite/clients/0x00306E4B16B6 * Checking configuration for consistency... * Attempting a non-interactive installation. * Loading configuration utility... * Beginning installation from source: /dev/rmt/0m ======= 06/17/13 20:47:21 EDT Starting system configuration... * Configure_Disks: Begin * Will install B.11.11 onto this system. * Creating LVM physical volume "/dev/rdsk/c2t0d0" (0/1/1/0.0.0). * Creating volume group "vg00". * Creating logical volume "vg00/lvol1" (/stand). * Creating logical volume "vg00/lvol2" (swap_dump). * Creating logical volume "vg00/lvol3" (/). * Creating logical volume "vg00/lvol4" (/tmp). * Creating logical volume "vg00/lvol5" (/home). * Creating logical volume "vg00/lvol6" (/opt). * Creating logical volume "vg00/lvol7" (/usr). * Creating logical volume "vg00/lvol8" (/var). * Extending logical volume "vg00/lvol1" (/stand). * Extending logical volume "vg00/lvol2" (swap_dump). * Extending logical volume "vg00/lvol3" (/). * Extending logical volume "vg00/lvol4" (/tmp). * Extending logical volume "vg00/lvol5" (/home). * Extending logical volume "vg00/lvol6" (/opt). * Extending logical volume "vg00/lvol7" (/usr). * Extending logical volume "vg00/lvol8" (/var). * Making HFS filesystem for "/stand", (/dev/vg00/rlvol1). * Making VxFS filesystem for "/", (/dev/vg00/rlvol3). * Making VxFS filesystem for "/tmp", (/dev/vg00/rlvol4). * Making VxFS filesystem for "/home", (/dev/vg00/rlvol5). * Making VxFS filesystem for "/opt", (/dev/vg00/rlvol6). * Making VxFS filesystem for "/usr", (/dev/vg00/rlvol7). * Making VxFS filesystem for "/var", (/dev/vg00/rlvol8). * Setting rotational delay to 0 for "/stand". * Configure_Disks: Complete * Download_mini-system: Begin x ./sbin/fs/hfs/mkfs, 290816 bytes, 568 tape blocks x ./sbin/fs/hfs/newfs, 212992 bytes, 416 tape blocks x ./sbin/fs/vxfs/mkfs, 393216 bytes, 768 tape blocks x ./sbin/fs/vxfs/newfs, 327680 bytes, 640 tape blocks x ./sbin/mkfs symbolic link to /sbin/fs_wrapper x ./sbin/newfs symbolic link to /sbin/fs_wrapper x ./sbin/lib/mfsconfig.d/hfs, 978 bytes, 2 tape blocks x ./sbin/lib/mfsconfig.d/vxfs, 966 bytes, 2 tape blocks x ./sbin/fs_wrapper, 233472 bytes, 456 tape blocks x ./sbin/sh, 401408 bytes, 784 tape blocks x ./usr/bin/mediainit, 32768 bytes, 64 tape blocks x ./usr/sbin/tunefs, 20480 bytes, 40 tape blocks x ./sbin/extendfs symbolic link to /sbin/fs_wrapper x ./sbin/fs/vxfs/extendfs, 319488 bytes, 624 tape blocks x ./sbin/fs/hfs/extendfs, 245760 bytes, 480 tape blocks x ./sbin/lvchange, 815104 bytes, 1592 tape blocks ./sbin/lvcreate linked to ./sbin/lvchange ./sbin/lvdisplay linked to ./sbin/lvchange ./sbin/lvextend linked to ./sbin/lvchange ./sbin/lvlnboot linked to ./sbin/lvchange ./sbin/lvreduce linked to ./sbin/lvchange ./sbin/lvremove linked to ./sbin/lvchange ./sbin/lvrmboot linked to ./sbin/lvchange ./sbin/pvchange linked to ./sbin/lvchange ./sbin/pvcreate linked to ./sbin/lvchange ./sbin/pvdisplay linked to ./sbin/lvchange ./sbin/pvmove linked to ./sbin/lvchange ./sbin/sdstolvm linked to ./sbin/lvchange ./sbin/vgcfgbackup linked to ./sbin/lvchange ./sbin/vgcfgrestore linked to ./sbin/lvchange ./sbin/vgchange linked to ./sbin/lvchange ./sbin/vgcreate linked to ./sbin/lvchange ./sbin/vgdisplay linked to ./sbin/lvchange ./sbin/vgexport linked to ./sbin/lvchange ./sbin/vgextend linked to ./sbin/lvchange ./sbin/vgimport linked to ./sbin/lvchange ... x ./monitor_bpr, 20480 bytes, 40 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (Recovery Archive). * Mon Jun 17 20:51:06 EDT 2013: Starting archive load of the source (Recovery Archive). * Positioning the tape (/dev/rmt/0mn). * Archive extraction from tape is beginning. Please wait. pax_iux: Ready for volume 2 pax_iux: Type "go" when ready to proceed (or "quit" to abort): - change the tape volume 2 (if any) and "go"
go
Continuing
Connection closed by foreign host.
...
Closing open logical volumes...
Done
Firmware Version 46.34
Duplex Console IO Dependent Code (IODC) revision 1
- - - - - - - - - - - - Live Console - - - - - - - - - - - -
Firmware Version 46.34
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State CoProcessor State Cache Size
Number State Inst Data
--------- -------- --------------------- ----------------- ------------
0 800 MHz Active Functional 33554432 33554432
1 800 MHz Stopped:Deconfigured Unknown 0 0
Central Bus Speed (in MHz) : 200
Available Memory : 2097152 KB
Good Memory Required : Not initialized. Defaults to 32 MB.
Primary boot path: 0/1/1/0.0
Alternate boot path: 0/0/2/0.3
Console path: 0/7/1/1.0
Keyboard path: 0/0/4/0.0
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
ISL Revision A.00.43 Apr 12, 2000
ISL booting hpux
Boot
: disk(0/1/1/0.0.0.0.0.0.0;0)/stand/vmunix
10952704 + 1904640 + 2656664 start 0x1f6068
alloc_pdc_pages: Relocating PDC from 0xfffffff0f0c00000 to 0x3f900000.
gate64: sysvec_vaddr = 0xc0002000 for 2 pages
NOTICE: autofs_link(): File system was registered at index 3.
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 6.
igelan0: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
System Console is on the Built-In Serial Interface
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 8388608
Starting the STREAMS daemons-phase 1
Checking root file system.
file system is clean - log replay is not required
Root check done.
Create STCP device files
$Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 2095104 Kbytes, lockable: 1560428 Kbytes, available: 1798776 Kbytes
/sbin/ioinitrc:
insf: Installing special files for ipmi instance 0 address 16
insf: Installing special files for pseudo driver framebuf
/sbin/krs_sysinit:
...
Starting the XMLTools subsystem ............................................. OK
Starting OpC agent processes (opcagt). ...................................... OK
Start CDE login server ...................................................... OK
The system is ready.
GenericSysName [HP Release B.11.11] (see /etc/issue)
Console Login:
If you see the login prompt it means it is restored !
No comments:
Post a Comment