Cisco MDS port zoning 101

Objective

• There are two FC ports (fd0, fd1) on a hp-ux rp3410 (hostname: rp3410 )
• The storage is EMC VNX5100, we will use SPA P1/P2 and SPB P1/P2.

Physical connection

• rp3410 fd0 will connect to SW1 port 1/7
• rp3410 fd1 will connect to SW2 port 1/7
• VNX5100 SPA P1 on SW1 port 1/1
• VNX5100 SPB P1 on SW1 port 1/2
• VNX5100 SPA P2 on SW2 port 1/1
• VNX5100 SPB P2 on SW2 port 1/2

Switch configuration:

We will create 4 zones, 2 on each switch: The zoneset is "full-zoneset"

SW1 wwn is 20:00:xx:xx:xx:xx:xx:xx

SW2 wwn is 20:00:yy:yy:yy:yy:yy:yy

The VSAN of SW1 is 201, SW2 is 202

(it is port zoning, for soft zoning by wwn, it will be ready later)

SW1:

config t

vsan database
vsan 201 interface 1/7
 

interface 1/7
no shutdown
switchport mode F
switchport description "rp3410_fd0"

zone name rp3410_fd0_VNX5100_VNX_SPA1 vsan 201
member interface fc 1/1 swwn 20:00:xx:xx:xx:xx:xx:xx
member interface fc 1/7 swwn 20:00:xx:xx:xx:xx:xx:xx

zone name rp3410_fd0_VNX5100_VNX_SPB1 vsan 201
member interface fc 1/2 swwn 20:00:xx:xx:xx:xx:xx:xx
member interface fc 1/7 swwn 20:00:xx:xx:xx:xx:xx:xx

zoneset name full-zoneset vsan 201
memeber rp3410_fd0_VNX5100_VNX_SPA1
memeber rp3410_fd0_VNX5100_VNX_SPB1
zoneset activate name full-zoneset

SW2

config t

vsan database
vsan 202 interface 1/7

interface 1/7
no shutdown
switchport mode F
switchport description "rp3410_fd1"

zone name rp3410_fd1_VNX5100_VNX_SPA2 vsan 202
member interface fc 1/1 swwn 20:00:yy:yy:yy:yy:yy:yy
member interface fc 1/7 swwn 20:00:yy:yy:yy:yy:yy:yy

zone name rp3410_fd1_VNX5100_VNX_SPB2 vsan 202
member interface fc 1/2 swwn 20:00:yy:yy:yy:yy:yy:yy
member interface fc 1/7 swwn 20:00:yy:yy:yy:yy:yy:yy

zoneset name full-zoneset vsan 202
memeber rp3410_fd1_VNX5100_VNX_SPA2 vsan 202
memeber rp3410_fd1_VNX5100_VNX_SPB2 vsan 202
zoneset activate name full-zoneset